• 2 Posts
  • 16 Comments
Joined 2 years ago
cake
Cake day: June 13th, 2023

help-circle






  • UPDATE: It crashed again today, and I was able to pull some logs and check the temperature at the time of the crash. (91 degrees which dropped to 71 degrees right before crashing?

    From system log

    <13>1 2024-03-13T18:30:44-04:00 OPNsense.my.home opnsense 44846 - [meta sequenceId="1192"] /usr/local/etc/rc.newwanipv6: No IP change detected (current: IPV6ADDRESSREDACTED, interface: wan)
    <13>1 2024-03-13T18:30:53-04:00 OPNsense.my.home opnsense 60522 - [meta sequenceId="1193"] /usr/local/etc/rc.newwanipv6: No IP change detected (current: IPV6ADDRESSREDACTED, interface: wan)
    <45>1 2024-03-13T22:12:44-04:00 OPNsense.my.home syslog-ng 10182 - [meta sequenceId="1"] syslog-ng starting up; version='4.6.0'
    <13>1 2024-03-13T22:12:45-04:00 OPNsense.my.home kernel - - [meta sequenceId="2"] ---<<BOOT>>---
    <13>1 2024-03-13T22:12:45-04:00 OPNsense.my.home kernel - - [meta sequenceId="138"] WARNING: / was not properly dismounted
    

    From dmesg

    arp: 192.168.1.61 moved from someMAC to anotherMAC on igc1
    arp: 192.168.1.61 moved from anotherMAC to someMAC on igc1
    WARNING: / was not properly dismounted
    WARNING: /: mount pending error: blocks 40 files 4
    

    I mean, I’m not saying that errors on the drive are the CAUSE of the problem, more likely a symptom, but it does look like it just straight up crashed, right?


  • Dmesg doesn’t go back very far, does it? I only see the current boot and the one before that, which was a normal shutdown.

    I believe I was able to see the last logs before the system turned off last time, and the last messages were syncing discs and all buffers synced, which I would have expected to be part of a normal shutdown.

    If it happens again I’ll be sure to get the logs before the crash or shut down and save it to a file.










  • Sopuli seems to be down, so responding from a different account.

    Yeah, it’s actually that there isn’t power for the Celeron box where all the other Ethernet currently is.

    Just so I’m understanding, why would all traffic need to go to my router (do you mean the opnsense one or the tplink one) twice? Wouldn’t it go Device -> Switch -> opnsense -> modem > internet? Or for my intranet communications, Device1 -> switch -> opnsense -> switch -> device2