Sorry for the confusion, but STL files are usually manifold 3d renders, for printing. No subtitles here unfortunately. I’m not even aware of a paid service/site for subtitles, is that a thing?

Only one I know is materialize.is

I’m still trying to find a way to get an invite…

Reposting as top level comment also: these are PWDIS drives: if you’re not using them somewhere with sata 3.2/3.3, you need to use an adapter for the power plug, or some tape, to block pins 1-3 (3.3v) as supplying it to these causes them to reset. Might be worth doing the taping anyway, if you’re using an enclosure or cage (where you can’t use the adapters) Just be aware.

2nd catch, behind the power on time: PWDIS drives: if you’re not using them somewhere with sata 3.2/3.3, you need to use an adapter for the power plug, or some tape, to block pins 1-3 (3.3v) as supplying it to these causes them to reset. Might be worth doing the taping anyway, if you’re using an enclosure or cage (where you can’t use the adapters)

The kicker to this sort of thing, is the pirated versions usually have the checks removed… and don’t need internet.

AFAIK materialize.is is still active, but you need an invite, and I am not “in”, as it were, though I would like to be.

If I’m reading this right, 80_PA is a keygen, and does not need to run on the target system. If it did, how would an android version be useful?

Install it elsewhere and follow its instructions.

Otherwise, if you’re stuck with this as your only system (do you even phone?), it’s VM time.

Ah, you are correct… then yes, sata to mobo, with something to secure that cable very well.

1.) Yes, SATA to eSATA will work.

2.) It is not worth it, for stability. Having a cable from mobo to something outside case is unsafe at minimum.

I would go with the other recommendation: get a cheap pci sata/esata card. Cost is small, safety and reliability goes way up, no more kludge adapter going to inside of case.